Hero Image
QuickApp for Nilan CTS602

QuickApp for Nilan macheines manufactured from 2020 (with CTS602 boards) is under development & coming soon! Leave a comment if you are interested in :)

Tuesday, November 12, 2024 | 1 minute Read
Hero Image
How to use in scenes

All values that can be managed in QuickApps are also available externally, for example from a scene. The values can be retrieved with the help of the json object published and periodically updated in the QuickApp values variable, while they can be written by calling the set_value() function of the QuickApp with the appropriate parameters. The QuickApp also publishes its own ID in the NilanQAID global variable after installation to make it easier to access its own variables.

Tuesday, September 3, 2024 | 2 minutes Read
Hero Image
Quick Start

QuickApp for Nilan Heat Pump with CTS 700 board Requirements A Nilan Heat pump with CTS 700 board a modbus RTU to TCP gateway (maybe already built-in) firmware version being at least 2.3.11.26 A Fibaro Home Center version 3 or greater. Installation Download QuickApp from here. Log into your Home Center as Admin. Install the QuickApp:

Tuesday, September 3, 2024 | 4 minutes Read
Hero Image
User Interface

User levels Since all the 13 QuickApps have already appeared in your device list, you may have noticed that some device names are suffixed with Guest or Admin. In addition to these, there is a third, so-called General user level, which is not marked with a suffix. This indicates which of the three user levels is recommended for the given QuickApp. Based on these, you can decide which users you give which intervention options, that is, which QuickApps will be visible to which users.

Tuesday, September 3, 2024 | 2 minutes Read
Hero Image
Variables

API All values that can be managed in QuickApps are also available externally, for example from a scene. The values can be retrieved with the help of the json object published and constantly updated in the QuickApp values variable, while they can be written by calling the set_value() function of QuickApp with the appropriate parameters. The QuickApp also publishes its own ID in the NilanQAID global variable after installation to make it easier to access its own variables.

Tuesday, September 3, 2024 | 1 minute Read